ZAL SELF-PRIMING PUMP
The ZAL range is used when priming capacity is a priority. It is suitable for
many uses with a wide range of applications including: transferring
between tanks under negative pressure, suction from underground tanks and are also used in a
range of CIP systems and applications.
The liquids being transfered need to be clean with no solid particles in suspension.
WHY ZAL PUMPS?
If the need for pumping in both directions is not required and when required capacities
are higher than the TA pump range.
Details
Applications
- Water
- Beverages
- Milk & By-products
- Juice & Concentrates
- Wine & Must
Material |
AISI 304/316 |
Impeller |
Open 18 and 20 star-shaped blades |
|
Ø min 180 – Ø max 250 mm |
| Connections | DIN 11851 (standard), GAS, SMS, etc (on request) |
Motor |
4 poles (1450 rpm) – I.CI. F – IP55 – 400V – 3PH – 50Hz |
APPLICATIONS: Wine, Dairy, Water industries, Breweries
- Capacity up to 55 m³/h
- Total head up to 45 m
- Max suction/aspiration height 4m
- Clear liquids with no solid particles in suspension
- Max workable viscosity 1000 cP